- Non Coring Bit
- 2017-12-21 15:13
- Non Coring Bit Terracore poly diamond chrystaline non coring bits Core Sampling The Terracore range also includes non-coring bits for open-hole drilling and hole cleaning. The non-coring bit range also provides complementary bit tools for drilling grout h
- HW Casing Cutter
- 2017-12-18 18:15
- Casing Cutters When the entire drill string cannot be recovered, Roschen casing cutters are the perfect tool to minimize loss. Single blade Bradley Style and dual blade casing cutters are available in all industry standard sizes. Casing Cutter Assembly De
- BW Casing Cutter
- 2017-12-05 21:39
- Casing Cutters When the entire drill string cannot be recovered, Roschen casing cutters are the perfect tool to minimize loss. Single blade Bradley Style and dual blade casing cutters are available in all industry standard sizes. Operations: Upon lowering
- Mission DTH Hammer
- 2017-12-05 04:57
- Mission DTH Hammer DTH hammers Hammers that drive productivity Roschen hammers combine high power and speed with low fuel consumption. They are tried and tested in demanding applications the world over. You can be assured our extensive offering will deliv
- Reaming Shell
- 2017-11-27 06:15
- Reaming shell Impregnated and Surface Set Wireline Diamond Reaming Shells With BQ NQ HQ PQ Roschen reaming shells are made with high-quality, synthetic and natural diamonds, embedded in a highly resistant matrix. They have additional protection made from
- Halco DTH Hammer
- 2017-11-22 02:10
- Halco DTH Hammer DTH HAMMERS Choosing the right hammer is largely determined by the hole sizes and type of rock formation. Ideally, the size of the hammer should match the required hole dimension as closed as possible, leaving just enough space for cuttin
- MACH Button Bits
- 2017-11-13 21:13
- MACH DTH Button Bits DTH Drill Bits are produced from premium quality nickel-alloy steel for increased durability and wear characteristics. Specific heat treatment standards and special stress relief processes ensure consistent performance. DTH hammer bit
- API DTH Drill Pipe Manufacturer
- 2017-11-08 05:17
- API DTH Drill Pipe Manufacturer Introduction: Drill pipes that are used in applications such as DTH/ DTHR/ DR basically comprise of a steel tube with a pin at one end and a box on the other. The job of the drill pipe is to transmit rotational torque and t
- QL DTH Hammer
- 2017-10-26 15:17
- Quantum Leap (QL) DTH Hammer Introduction: Our Quantum Leap product line is available for those seeking a good balance between strong performance and cost. This product line was the industry's first hybrid-combination of valve and valve less air cycle
- Button Bits Grinding Pin
- 2017-09-30 20:43
- Button Bit Sharpening Hard rock drill bits have Tungsten carbide “buttons” that become dull and flat during the drilling process. These buttons can be refurbished to extend the service life of the drill bit. An 89mm diameter drill bit can have approx. 1.5
- PWL Casing Advancer
- 2017-09-04 17:58
- Casing Advancers Wireline Casing Advancers PWL Casing Advancer Casing through difficult overburden and caving bedrock formations with Tricone Drill Bits Roschen offers a complete line of wireline casing advancers, in all standard industry sizes. Roschen p
- Concrete Core Drill And Impregnated Diamond Bits
- 2017-08-31 13:13
- Concrete core drill and impregnated diamond bits Mineral Exploration Impregnated Diamond Core Bit Ultramatrix Core Bits for Series UMX 07 for Soft Formation drilling Features of UMX Concrete core drill and impregnated diamond bits: 1. High wear resistance
- Step Type Bits
- 2017-08-26 12:50
- Step Type Bit Step type bits are the most common type of drag bit used in the world today. They are primarily designed for soft to medium formations. Step Type: Bits are primarily designed for rapid penetration in soft to medium formations such as clay, s
- PW Casing Cutter
- 2017-08-12 09:36
- Casing Cutters When the entire drill string cannot be recovered, Roschen casing cutters are the perfect tool to minimize loss. Single blade Bradley Style and dual blade casing cutters are available in all industry standard sizes. Casing Cutter Assembly De
- Diamond Bit And Core Drill Bit
- 2017-08-02 20:21
- ROSCHEN Geotechnical drilling, geothermal drilling, Oil and gas drilling, Exploration Core drilling, Rock Drilling, can offer the equipment needed for all rock drilling, underground and surface exploration applications in Mining Industry, Water Well Indus
- Sonic Casing Shoe
- 2017-07-20 16:03
- Sonic Casing Bits Roschen offers a complete line of quality sonic bits and accessories designed to provide excellent performance and wear resistance in the demanding applications unique to sonic drilling. All sonic bits are manufactured from premium quali
- MACH DTH Hammer
- 2017-07-20 01:14
- Mach DTH Hammer MACH RANGE This is a proven hammer that has been around for over 30 years and is designed for all kinds of drilling conditions but excels in overburden drilling due to the high frequency with less blow energy for drilling through unstable
- SWT Casing Advancer
- 2017-07-17 04:24
- Casing Advancers SWT Casing Advancer Drilling Through Sands and Gravels with Sandvik Overburden Drilling System ROSCHEN Casing Advancer has been designed to allow drilling and casing to be carried out at the same time as one integral operation. This featu
- Tungsten Carbide Tip Bit
- 2017-07-13 06:20
- Tungsten Carbide Tip Core Bit B116 T. C. (Tungsten Carbide) Metric Core Bit for Geotechnical Investigation Exploration Core Drilling Product Description: Tungsten Carbide Core Bits are designed especially for soil investigation and geotechnical drilling,
- DHD DTH Hammer
- 2017-07-02 03:09
- DHD DTH Hammer DHD340 DTH Hammer with 115mm diameters bits for Down The Hole Hammer Drilling We can supply all series of drilling equipment and drilling tools suitable for Atlas Copco DTH Hammer, Sandvik DTH Hammer,etc. By using high-quality raw materials
